MagicWave 4000 / 5000

WIG welders now have something they can really get excited about. Fronius has developed a machine series that leaves nothing left to be desired: MagicWave 4000/5000 for direct and alternating current and the TransTig 4000/5000 for direct current. Active Wave and digitalization are the key technologies behind the design of this machine .

However you look at it, these power sources are amicable contemporaries: noticeably quiet – light arc is as quiet as possible, nevertheless incredibly stable; extremely simple, even self-explanatory operation; light and robust at the same time, and completely digitalized– unique among WIG machines.

 

Process: 

  • Manual electrode (MMA) welding
  • TIG AC/DC

 

Recommended ground material: 

  • Aluminium
  • Special metals
  • Stainless steel
  • Steel

 

Recommended areas of use:

  • plant construction, machine-building industry, steel
  • Automotive & ancillary industry
  • Chemical plant construction
  • Industrial plant construction/assembly plant
  • Maintenance and repair
  • Aviation and space industry
  • Metal & portal construction, forge
  • Robot welding
  • Construction of rail vehicles & rolling stock
  • Shipbuilding industry and offshore engineering

 

Checklist (excerpt)

General:

  • Energy-saving inverter technology
  • Anti-stick function
  • Automaitc cooling unit standby
  • Automatic ball formation
  • Automatic post-gas time (welding current dependant)
  • Continuous welding-current adjustment
  • Digital welding process
  • Gas test function
  • Generator compatible
  • Hot Start
  • Interconnection hose pack bracket
  • Lift arc ignition / HF switchable
  • Machine earthing test
  • Microprocessor control
  • Operating-hours counter
  • Over temperature sensor switch
  • Polarity switchover
  • Quieter arc with Active Wave
  • Remote controllable
  • RPI ignition
  • S-Sign, CE-Sign standard
  • Thermostat controlled fan
  • Transportgriff
  • Upgrading though modular system
     

Operating mode

  • 2 step mode, 4 step mode
  • AC / DC
     

Display of

  • End crater current
  • Hold function
  • Mains Voltage monitoring
  • Operating mode
  • Operating sequence
  • Overtemperature
  • Service codes
  • Welding current (actual value)
  • Welding voltage (actual value)
     

Adjustable parameters

  • AC balance
  • AC frequence
  • DownSlope
  • Dynamic
  • Electrode diameter
  • End crater current
  • Gas post-flow time
  • Gas pre-flow time
  • Hot-Start
  • Start current
  • Stepless welding power
  • TAC (Heften nach Programm)
  • UpSlope

 

Technical Data MagicWave 4000

Mains voltage ± 15 %  3x400 V
Welding current range WIG 3 - 400 A
Welding current range MMA 10 - 400 A
Duty cycle (10min/40°C) 45% at 400 A
Duty cycle (10min/40°C) 100% at 310 A
Dimensions l/w/h 625/290/705mm
24.6/11.4/27.8 "
Weight 58,2 kg
128.3 lb.
Degree of protection IP 23
Approval/Safety Symbols CE, CSA, S

 

Technical Data MagicWave 5000

Mains voltage ± 15 %  3x400 V
Welding current range WIG 3 - 500 A
Welding current range MMA 10 - 440 A
Duty cycle (10min/40°C) 40% at 500 A
Duty cycle (10min/40°C) 100% at 350 A
Dimensions l/w/h 625/290/705mm
24.6/11.4/27.8 "
Weight 58.2 kg
128.3 lb.
Degree of protection IP 23
Approval/Safety Symbols CE, CSA, S
   

 

 

 

Manual en español